lib cell clock balancing offset in clock latency report

上一篇 / 下一篇  2018-05-29 20:48:52

Regarding the "lib cell clock balancing offset", this value
comes from the min/max_clock_tree_path library timing arcs.

If there is a min/max_clock_tree_path in the library for the ETM pin,CTS will use the delay coming from the min/max_clock_tree_path arcs forthe ETM pin while balancing the clock tree. For the longest path, itwill pick the delay from the max_clock_tree_path arc and for theshortest path it will pick the delay coming from themin_clock_tree_path.

To check the value we need to run the command
report_clock_qor -show_paths -to <pin> -type latency






:loveliness: :handshake :victory: :funk: :time: :kiss: :call: :hug: :lol :'( :Q :L ;P :$ :P :o :@ :D :( :)

Open Toolbar